Table of Contents
Advertisement
5.
Intel
H61 Serial ATA 3.0Gb/s connectors (7-pin SATA3G_1~3)
®
These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical
drives via Serial ATA 3.0 Gb/s signal cables.
IMBM-H61A
IMBM-H61A Intel
NOTES:
•
You must install Windows
Serial ATA hard disk drives.
•
Due to H61 Chipset limitation, AHCI Mode only works on Windows
Windows
To configure the SATA type in BIOS, click Advanced tab > SATA
•
Configuration > SATA Mode Selection. See section 3.4.3 SATA
Configuration for details.
When using hot-plug and NCQ, set the SATA Mode Selection item in the
•
BIOS to [AHCI]. See section 3.4.3 SATA Configuration for details.
6.
LVDS connector (30-pin LVDS)
This connector is for a LCD monitor that supports Low-voltage differential
signaling (LVDS) interface.
IMBM-H61A
IMBM-H61A LVDS connector
Chapter 2: Motherboard information
SATA 3.0Gb/s connectors
®
XP Service Pack 3 or later version before using
®
7. Please use IDE Mode on Windows
®
PIN 1
XP.
®
LVDS
Vista/
®
2-19
Advertisement
Table of Contents
