Restore On Ac / Power Loss; System Thermal; Standby Time Out; Suspend Time Out - VIA Technologies EITX-3001 User Manual

Restore on AC / Power Loss

The field defines how the system will respond after an AC power
loss during system operation.
Settings Description
Power Off Keeps the system in an off state until the power button is
pressed.
Power On Restarts the system when the power is back
Last State Save in last state

System Thermal

Settings Description
Enabled Enables the user the manually specify the Thermal Active
Temperature and THRM Throttle Ratio settings.
Disabled Disables the manually settings of Thermal Active Temperature
and THRM Throttle Ratio settings.

Standby Time Out

Settings Description
Disabled Support for this feature will be unavailable.
1 – 8 min, Enables the user to manually specify the length of time of
10 – 60 min inactivity before the BIOS puts the system into standby
mode.
Increments in multiples of 2 from 1 to 8 minutes.
Increments of 10 from 10 to 60 minutes.

Suspend Time Out

Settings Description
Disabled Support for this feature will be unavailable.
1 – 8 min, Enables the user to manually specify the length of time of
10 – 60 min inactivity before the BIOS puts the system into suspend
mode.
Increments in multiples of 2 from 1 to 8 minutes.
Increments of 10 from 10 to 60 minutes.

Hard Disk Time Out (Minute)

Settings Description
Disabled Support for this feature will be unavailable.
1 – 15 min Enables the user to manually specify the length of time of
hard disk inactivity before the BIOS stops spinning the
hard drive.
Increments of 1.
57