Operating Information; Accessories; Table 1: Standard Accessories - Tektronix IsoVu TIVM Series User Manual

Table of Contents

Advertisement

Operating information

Accessories

Standard accessories
TIVM Series Measurement System User Manual
This section lists the standard and optional accessories available for the
measurement system.

Table 1: Standard accessories

Accessory
IsoVu product carrying case, soft case
IsoVu accessories carrying case, soft case
Solder aid for 0.062-inch (1.57 mm) pitch square pins (0.016 - 0.018-inch
(0.4 - 0.46 mm) square pin installation tool)
5X Sensor tip cable
25X Sensor tip cable
5/16-inch SMA wrench/driver tool
Probe tip adapter (blue), MMCX to 0.1-inch (2.54 mm) square pin
(0.025-inch (0.635 mm) square pins)
Probe tip adapter (white), MMCX to 0.062-inch (1.57 mm) square pin (0.016
- 0.018-inch (0.4 - 0.46 mm) square pins)
DUT Interface pin kit with (qty. 20) 0.018-inch (0.46 mm) round solder-in
pins
Flexible tripod with quick release
Flexible tripod feet, 3 each
Probe tip tripod support with living hinge, 2 each
Certificate of traceable calibration
Data calibration report
Tektronix
part number
016-2108-xx
016-2110-xx
003-1946-xx
IVTIP5X
IVTIP25X
003-1947-xx
131-9717-xx
131-9677-xx
020-3169-xx
352-1171-xx
344-0693-xx
352-1170-xx
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IsoVu TIVM Series and is the answer not in the manual?

Table of Contents