Safety Instructions - Disassembly And Disposal - bora PKT11 Operating And Installation Instructions

Safety
EN
familiar with and comply with the standard
national regulations and supplementary
regulations of the local utility companies.
Work on electrical components must be
conducted by trained electrical personnel.
The electrical safety of the appliance is only
guaranteed if it is connected to a protective
conductor system that has been installed in
line with regulations. Ensure that this basic
safety precaution is met.
Cooktop
DANGER!
Risk of electric shock!
Incorrect connection of the device
to the mains voltage could cause
electric shocks.
Make sure that the device is firmly
X X
connected to the mains voltage.
Make sure the device is connected
X X
to a properly installed earth
conductor system.
Make sure a system is installed
X X
which allows disconnection from
the network with a contact
opening width of at least 3 mm
across all poles (circuit breaker,
fuses, automatic circuit breakers,
contactors).
DANGER!
Risk of electric shock!
If the mains connection cable comes
into contact with hot hobs, it could
get damaged. A damaged mains
connection cable can cause a
(deadly) electric shock.
Make sure that the mains
X X
connection cable cannot come
into contact with hot hobs.
Make sure that the connection
X X
cable is not squashed or damaged.
8
CAUTION!
Lifting heavy loads can cause back
injuries!
If not correctly handled, removing
and installing the device can causes
injuries to the limbs or torso.
Removing the cooktop from the
X X
packaging is a two-person job.
Placing the cooktop into the
X X
worktop cut-out is a two-person
job.
Use appropriate aids to prevent
X X
damage or injuries to limbs or
torso.
Check the appliance for visible damage
X X
before installing it.
Do not install damaged devices.
X X
A damaged device is a hazard.
Q Q
Repair work must only be carried out by
Q Q
specialists authorised by the manufacturer.
2.4 Safety instructions –
disassembly and disposal
The device must only be disassembled by
trained specialists who are familiar with and
comply with the standard national regulations
and supplementary regulations of the local
utility companies.
Work on electrical components must only be
conducted by trained electrical personnel.
DANGER!
Risk of electric shock!
Incorrectly disconnecting the
appliance from the mains results in a
risk of electric shock.
Securely disconnect the appliance
X X
from the mains using LS switches,
fuses, automatic circuit breakers
or contactors.
Use an authorised measuring
X X
device to ensure that there is no
power to the appliance.
www.bora.com