Changing The Setting - bora PKT11 Operating And Installation Instructions

Installation
EN
The following menu options are available:
Menu options
Volume of warning beep
C 0
Select operating mode (normal mode or demo mode)
C 1
0° or 180° installation
C2
Type of control knob display
C3
Tab. 5.4 Menu options in the configuration menu
Touch the touch surface on the control knob again for
X X
1 second to confirm the menu you want.
The sub-menu is accessed and the display switches to
Q Q
a three-character combination (e.g.
INFO In the three-character combination shown, the
right-hand figure shows the value saved in the
system.
Setting the volume of the warning beep
Once you have confirmed menu option
the volume of the warning beep.
Setting Warning beep volume
100% (max. volume)
C 00
10% (min. volume)
C0 1
20%
C 02
30%
C 03
40%
C 04
50%
C 05
60%
C 06
70%
C 07
80%
C 08
90%
C 09
Tab. 5.5 Warning beep volume
Select mode
When you have confirmed menu option
the operating mode.
Setting Mode
Normal operating mode
C 1 0
Demo mode
C 1 1
Tab. 5.6 Operating modes
INFO All the control knob functions are available
in demo mode. The heating function for the
cooktop is deactivated. Demo mode is used,
for example, for exhibitions.
20
0° or 180° installation
In menu option
installed rotated around 180°.
Setting
C 20
C2 1
Tab. 5.7
INFO
Type of control knob display
).
C23
In the
knob display should show the temperature, the power
level or a combination of the two.
Setting
C 30
, you can set
C0
C3 1
C 32
Tab. 5.8
Control knob display options
Temperature
levels
Factory setting
150° C
160° C
, you can select
C 1 170° C
180° C
190° C
Factory setting 200° C
210° C
220° C
230° C
250° C
Tab. 5.9

5.6.3 Changing the setting

Turn the knob ring clockwise to increase the value.
X X
Turn the knob ring anticlockwise to decrease the value.
X X
, you can set whether the cooktop is
C2
Display
Installation 0°
Installation 180°
Installation direction
For installation rotated around 180°, the
assign the correct cooking zones inside the
control knob display.
menu option, you can set whether the control
C3
Display
Temperature display in °C
Power display
Combination display
Control knob display
Low temperature
levels
80° C
90° C
100° C
110° C
120° C
130° C
140° C
Control knob display options
Factory setting
C2 1
Factory setting
C30 C31 C32
80 80
90 . 90
100 100
1 10 : 1 10
120 120
130 * 130
140 140
150 1 1
160 2 2
170 3 3
180 4 4
190 5 5
200 6 6
2 10 7 7
220 8 8
230 9 9
250 P P
www.bora.com