Exiting Configuration Menu; Handover To User - bora PKT11 Operating And Installation Instructions

Press the touch surface on the control knob again
X X
for 1 second to confirm the new setting. The value
is saved and a beep sounds. The previously selected
menu option is shown again on the control knob
display.

5.6.4 Exiting configuration menu

Twist the knob ring until the display shows
X X
Now press the touch surface on the control knob again
X X
for 1 second to exit the configuration menu.
The display goes out and a beep sounds.
Twist the knob ring to the 12 o'clock position.
X X
appears on the display for 10 seconds. The display
0
then goes out with a beep.
INFO If no settings are changed in a menu or sub-
menu option for 2 minutes, the configuration
menu is closed automatically.
5.7

Handover to user

Once installation is complete:
Explain the main functions to the user.
X X
Explain all safety-related aspects of operation and
X X
handling to the user.
Affix the nameplate supplied to the back of these
X X
operating and installation instructions.
Provide the user with the accessories and the
X X
operating and installation instructions for safe storage.
www.bora.com
.
C
Installation
EN
21