Cleaning The Control Knobs; Cleaning The Knob Ring; Cleaning The Touch Surface And The Knob Housing - bora PKT11 Operating And Installation Instructions

the cooktop or the stability of the stainless steel grill
surface.
Changes in the colour of the cooktop are the result of
residue which has not been removed and has burnt on.
7.4

Cleaning the control knobs

3
Fig. 7.1 Pull out the knob ring
[1]
Knob casing
[2] Touch surface
[3]
knob ring

7.4.1 Cleaning the knob ring

The knob ring can only be cleaned by hand.
Remove the knob ring from the knob housing.
X X
Use a cleaner and degreaser in one.
X X
Rinse the knob ring in hot water.
X X
Clean the knob ring with a soft brush.
X X
Rinse the knob ring well after cleaning.
X X
Dry the knob ring carefully.
X X
Place the dry knob ring back on the knob housing.
X X
Make sure it is positioned correctly (0 position).
X X
If necessary, twist the knob ring to the 12 o'clock
X X
position (= 0 position).
7.4.2 Cleaning the touch surface and the
knob housing
Pull off the knob ring.
X X
Clean the touch surface and the knob housing with a
X X
soft, damp cloth.
Dry the touch surface and the knob housing carefully.
X X
Place the knob ring back on the knob housing.
X X
INFO If the knob ring has not been fitted correctly, a
segment rotating clockwise is displayed in the
central control knob display
www.bora.com
2 1
.
Cleaning and maintenance
EN
27