Reload Default; Informaion Of The Device/3.20 Slave Receive Mode; Operations In Automatic Mode/3. 22 Select Chase - ProLights RUBYFCX User Manual

RUBYFCX
15
to confirm.
• Using the directional keys enter the password 050 and press the ENTER button to confirm.
• Once the password is entered, it is possible to set the Pan values, etc.
• Press the UP/DOWN button to scroll through the menu, then select one of the functions mentioned
above and press the ENTER button to confirm the choice.
• Enter the desired value using the directional keys, then press the ENTER button to confirm the choice.
• Press the LEFT button repeatedly to exit the menu and to save the changes made.

3.18 RELOAD DEFAULT

Select this function to reset the unit to the factory settings:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll through the menu, select the Advanced icon, then press the ENTER
button to access the next menu.
• Press the UP/DOWN button to select Reload Default and press the ENTER button to proceed.
• Press the UP/DOWN button to select the preferred restore mode Basic Reload /Program Reload /Private Reload /
All Reload, then press the ENTER button to confirm.
• Press the UP/DOWN buttons to select ON or OFF, then press the ENTER button to confirm.
• Press the LEFT button repeatedly to exit the menu and to save the changes made.
3.19 INFORMATION ON THE DEVICE
To view all the information on the device, proceed as follows:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to select Information, then press the ENTER button to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, then select one of the following information and
press the ENTER button to display it.
- Time Information - Through the Time information function, the operating time of the projector can be shown
on the display.
- Temperature - Through the Temperature function it is possible to display on the display the temperature
inside the moving head, where the lamp is located. The temperature can be displayed in degrees Celsius
or Fahrenheit.
- Fans Speed - Through the Fans Speed function it is possible to display on the display the fan speed present
near the lamp. The speed measurement is expressed in RPM (revolutions per minute).
- Channel Value - Through the Channel Value function it is possible to display on the display the values of the
channels with which the unit will work once switched on.
- Fixture Model - Through the Fixture Time function, the operating time of the projector can be shown on the
display.
- Error Message - Through the Error Message function it is possible to display on the display any channel errors.
- Fixture Model - Through the Fixture Fixture Model it is possible to visualize the code of the model and the
name of the manufacturer.
- Software Version - Through the Software Version function, the version can be viewed on the display of the
installed software.
• Press the LEFT button repeatedly to exit the menu and to save the changes made.
3.20 SLAVE RECEIVE MODE
This mode allows you to connect multiple units online without a controller. The first unit will be set
as a Master and the others will work as Slaves with the same effect.
In addition, a Master RUBYFCX unit can send up to 3 different groups of data to the Slave units, ie it can
drive 3 different Slave units that execute 3 different parts of the program. The Master unit sends the 3 parts
of the program in a continuous loop while the Slave units will receive data from the Master unit according
to the group to which the slave unit has been assigned.