Functions And Settings; Operation; Basic - ProLights RUBYFCX User Manual

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Connect the supplied main cable to a socket (100-240V~/50-60Hz). The unit will run built-in program to
reset all motors to their home position. Shortly after that the RUBYFCX is ready for operation. To switch off,
disconnect the mains plug from the socket. For a more convenient operation it is recommended to con-
nect the unit to a socket which can be switched on and off via light switch.

3.2 BASIC

The control panel of RUBYFCX has a display and 6 buttons for the complete programming and manage-
ment of the projector menu (fig.4).
W-DMX
ETHERNET
UP
Increases the value Decreases the value
displayed or passes displayed or passes
to the previous item to the next item in
in a menu the menu
RUBYFCX
DOWN LEFT
Return to the top
level
BATTERY
MIC
RIGHT
Commute from
units, tens, hundred
in the menu
Fig.4 - Functions of the buttons and display icons
ENTER
Confirms the Used to activate the
displayed value, backup battery. It
or activates the allows to switching
displayed function, display interface
or enters the without main power
successive menu
7
BATTERY