Adjust; Reset Of The Function; Calibration - ProLights RUBYFCX User Manual

14
• Press the LEFT button repeatedly to exit the menu and to save the changes made
- Hibernation - Select this function to activate the standby mode in the unit. This function will be activated
automatically after a period of inactivity, defined by the user, without an incoming DMX signal. In standby
mode the lamp and all motors will not be powered if no signal is sent to the unit for a user-defined period.
The unit will perform an automatic reset and will return to operation as soon as the DMX signal is sent.
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll through the menu, select the Set Up icon, then press the ENTER but-
ton to access the next menu.
• Press the UP/DOWN button to select Fixture and press the ENTER button to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, then select Hibernation and press the ENTER but-
ton to confirm.
• Select the desired time (1 ~ 99min) using the directional buttons or select Disable to disable this function,
then press the ENTER button to confirm your choice.
• Press the LEFT button repeatedly to exit the menu and to save the changes made.
-Theater Mode - Select this function for theatrical situations or in which you want less noise
of the car; the output of the LED will be limited to limit the heating and the fans:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll through the menu, select the Set Up icon, then press the ENTER but-
ton to access the next menu.
• Press the UP/DOWN button to select Fixture and press the ENTER button to proceed.
• Press the UP/DOWN button to scroll through the menu, then select Theater Mode and press the ENTER
button to confirm.
• Select YES to activate the function or NO to deactivate it, then press the ENTER button to confirm the
selection.
• Press the LEFT button repeatedly to exit the menu and to save the changes made.

3.15 ADJUST

• This function allows you to change all parameters. Press the UP/DOWN button to select one of the
parameters and press ENTER to change its value (000-999) using the UP/DOWN button.
• Press the ENTER button to confirm your choice.
• Press the LEFT button repeatedly to exit the menu and to save the changes made
3.16 RESET OF THE FUNCTIONS
• You can start a preset program to restore the selected function:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll through the menu, select the Advanced icon, then press the ENTER
button to enter the next menu.
• Press the UP/DOWN button to select Reset and press the ENTER key to access the next menu.
• Press the UP/DOWN button to scroll through the menu, then select the function you want to reset
between those.
• Press the ENTER button to confirm the selection and wait for the selected function to be restored.
• Press the LEFT button repeatedly to exit the menu and to save the changes made.

3.17 CALIBRATION

Select this function to calibrate and adjust the effect wheels in their correct positions:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll through the menu, select the Advanced icon, then press the ENTER
button to enter the next menu.
• Press the UP/DOWN button to select Calibration and press the ENTER button to proceed.
• Press the UP/DOWN button to scroll through the menu, then select Password and press the ENTER button
RUBYFCX