Temperature - ProLights RUBYFCX User Manual

RUBYFCX
12
RDM and conventional DMX devices can operate in a single DMX line. If splitters are used
DMX and an RDM controller is used, the splitters must support the RDM protocol. The number and type of
RDM parameters depend on the controller (not included) used.
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to select Connect and press the ENTER button to access the next menu.
• Press the UP/DOWN button to scroll through the menu, then select RDM ID and press the ENTER button
to confirm.
• Using the arrow keys select the mode (Mode 1/Mode 2) and press the ENTER button to confirm.
• Using the arrow keys select Password to enter the password 050 and press the ENTER button to confirm.
• Once the password has been entered, it is possible to set the PID Code, necessary to control the unit with
the RDM protocol. Press the UP/DOWN button to scroll through the menu, then select PID Code and press
the ENTER button to confirm.
• Using the directional keys, enter the PID Code, then press the ENTER button to confirm the choice.
• Press the LEFT button repeatedly to exit the menu and to save the changes made.

3.11 TEMPERATURE

To set the unit of measurement of the temperature shown on the display:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll through the menu, select the Set Up icon, then press the ENTER but-
ton to access the next menu.
• Press the UP/DOWN button to select Temperature and press the ENTER button to proceed.
• Press the UP/DOWN button to scroll through the menu, then select Temperature C/F and press the ENTER
button to confirm.
• Press the UP/DOWN button to select the Celsius/Fahrenheit measurement unit, then press the ENTER but-
ton to confirm the selection.
• Press the LEFT button repeatedly to exit the menu and to save the changes made.
To set the maximum internal temperature of the projector:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll through the menu, select the Set Up icon, then press the ENTER but-
ton to access the next menu.
• Press the UP/DOWN button to select Temperature and press the ENTER button to proceed.
• Press the UP/DOWN button to scroll through the menu, then select Max Temperature and press the ENTER
button to confirm.
• Press the UP/DOWN button to select the desired temperature within the permitted limits
(60~139°C/176~282°F), then press the ENTER button to confirm your choice.
• Press the LEFT button repeatedly to exit the menu and to save the changes made.
3.12 MOVEMENT
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll through the menu, select Set Up, then press the ENTER button
access the next menu.
• Press the UP/DOWN button to select Movement and press the ENTER button to proceed.
• Select the proposed option with the UP/DOWN button and press the ENTER key to confirm.
- Pan Revers - Rotation in the opposite direction of the moving head. NO to deactivate the function (normal
setting); YES to activate the function (Pan Reverse).
- Tilt Reverse - Inclination in the opposite direction of the moving head. NO to deactivate the function (nor-
mal setting), YES to activate the function (Tilt Reverse).
- Pan Degree - Angle of Pan. Select 540 ° or 630 ° to set the maximum angle of rotation of the moving head.
- Feedbacks - Reset of Pan/Tilt position after accidental shift. Select NO to deactivate the function or YES to
activate the function.