Safety Chapter - ProMinent delta General Operating Instructions

1

Safety Chapter

Explanation of the safety information
Warning signs denoting different types of
danger
The following signal words are used in these operating instructions to
identify different severities of a hazard:
Signal word
WARNING
CAUTION
The following warning signs are used in these operating instructions to
denote different types of danger:
Warning signs
WARNING!
Warning of hazardous or unknown feed chemical
Should a hazardous or unknown feed chemical be used, it
may escape from the hydraulic components when working
on the pump.
– Take appropriate protective measures before working on
the pump (protective eyewear, protective gloves, ...).
Read the safety data sheet on the feed chemical.
– Drain and flush the liquid end before working on the
pump.
CAUTION!
Warning of feed chemical spraying around
Feed chemical can spray out of the hydraulic components if
they are manipulated or opened due to pressure in the liquid
end and adjacent parts of the system.
– Disconnect the pump from the mains power supply and
ensure that it cannot be switched on again by unauthor‐
ised persons.
– Depressurise the system before commencing any work
on hydraulic parts.
Safety Chapter
Meaning
Denotes a possibly hazardous sit‐
uation. If this is disregarded, you
are in a life-threatening situation
and this can result in serious inju‐
ries.
Denotes a possibly hazardous sit‐
uation. If this is disregarded, it
could result in slight or minor inju‐
ries or material damage.
Type of danger
Warning – high-voltage.
Warning – danger zone.
5