Module D5 - ABB DCS800 Hardware Manual

Module D5

DCS800-S0x-0900
DCS800-S0x-1200
DCS800-S0x-1500
DCS800-S0x-2000
Weight appr. 110 kg
127.5 125
U1
Support
*
C1
fan terminals
Busbars in mm:
DC 80 x 10
AC 60 x 5
3ADW000194R0611 DCS800 Hardware Manual f us
510
450
125
for M10
V1 W1
Support
> 510
min. 480
earthing M12
D1
276
400
461
483
Mounting the converter module D5 inside an
enclosure
Two supports should be mounted inside the
enclosure in such a way, that they can carry the
converter's weight when placing the converter
later on. The minimum distance between the
supports should not be less then 480 mm
because of electrical clearance (DC busbars).
A L-shape support as indicated will allow to
place the converter temporarily close to the front
end of the support (weight still taken by a lifting
device) and then push it back to the back plate
of the enclosure. The upper and lower holes in
the back plate of the converter should be used
to fix the converter in that position.
400
17 26
85.5
17
26
Ø 14 34
Ø 14
17.75 fan terminals
65.5 25 50 50 50
325.5
A5_dim_a.dsf
Dimensional drawings
107
cable tray
with = 40 mm
earthing height =39 mm
M12