Using Ammonia Gas; Hazardous Chemicals - PerkinElmer Clarus SQ 8 MS Series Hardware Manual

Clarus SQ 8 MS Hardware Guide

Using Ammonia Gas

WARNING WARNING

Hazardous Chemicals

WARNING WARNING
Be aware that the chemicals that you use in conjunction with the Clarus SQ 8 may
be hazardous. DO NOT
materials unless you have received appropriate safety training and have read and
understood all related Material Safety Data Sheets (MSDS). MSDSs give
information on physical characteristics, precautions, first aid, spill clean up and
disposal procedures. Familiarize yourself with the information and precautions
contained in these documents before attempting to store, use or dispose of the
reagents. Comply with all federal, state, and local laws related to chemical storage,
handling, and disposal.
You must work under a suitable hood when handling and mixing certain chemicals.
The room in which you work must have proper ventilation and a waste collection
system. Always wear appropriate safety attire (full-length laboratory coat, protective
glasses, gloves, etc.), as indicated on Material Safety Data Sheets.
24
Hazardous gas vapors. . When using ammonia gas while running in the
Hazardous gas vapors
chemical ionization (CI) mode, it is necessary to vent the mass
spectrometer effluent from the forepump exhaust into a fume hood or
charcoal trap.
Hazardous chemicals. Before using samples, thoroughly
Hazardous chemicals.
familiarize yourself with all hazards and safe handling practices.
Observe the manufacturer's recommendations for use, storage
and disposal. These recommendations are normally provided in
the Material Safety Data Sheets (MSDS) supplied with the
solvents, chemicals, and pump oils.
DO NOT store, handle, or work with any chemicals or hazardous