Contamination - PerkinElmer Clarus SQ 8 MS Series Hardware Manual

Clarus SQ 8 MS Hardware Guide
WARNING WARNING
Ensure that the power cord is correctly wired and that the ground leads of all electrical units
(for example, recorders, integrators) are connected together via the circuit ground to earth.
Use only three-prong outlets with common earth ground connections. For details, refer to
the descriptions in the Clarus GC Installation Guide (P/N 09936590 or 09936779) .
Servicing of electrical components within the mass spectrometer should be
•
performed only
Servicing of the incoming AC power line components in your laboratory
•
should be performed only
WARNING WARNING
Under no circumstances should circuit boards be removed or inserted unless the
instrument is disconnected from line power.

Contamination

CAUTION CAUTION
20
For protection against fire hazard, only replace a fuse with a fuse
with the same type and rating. For example, a 10 amp fuse for
120 V and a 5 amp fuse for 240 V.
only by a PerkinElmer Service Representative.
only by a licensed electrician.
Electrical shock hazard. To prevent electrical shock, disconnect To prevent electrical shock, disconnect
the power cord from the AC outlet before servicing. the power cord from the AC outlet before servicing.
Never touch manifold components with your fingers. This will
introduce contaminants into the system.