Alcatel-Lucent 7705 SAR-8 System Management Manual page 84

Security Command Reference
deny-host-unreachable — specifies that packets not matching the selection criteria will be denied
renum
Syntax renum old-entry-number new-entry-number
Context config>system>security>management-access-filter>ip-filter
Description This command renumbers existing management access filter entries to resequence filter entries.
The 7705 SAR exits on the first match found and executes the actions in accordance with the
accompanying action command. This may require some entries to be renumbered from most to least
explicit.
Parameters old-entry-number — the entry number of the existing entry
new-entry-number — the new entry number that will replace the old entry number
Management Access Filter Entry Commands
entry
Syntax [no] entry entry-id
Context config>system>security>management-access-filter>ip-filter
Description
This command is used to create or edit a management access filter entry. Multiple entries can be
created with unique entry-id numbers. The 7705 SAR exits the filter upon the first match found and
executes the actions according to the respective action command. For this reason, entries must be
sequenced correctly from most to least explicit.
An entry may not have any match criteria defined (in which case, everything matches) but must have
at least the keyword action defined to be considered complete. Entries without the action keyword
are considered incomplete and inactive.
The no form of the command removes the specified entry from the management access filter.
Default No entries are defined.
Parameters entry-id — an entry ID uniquely identifies a match criteria and the corresponding action. It is
Page 84
and a host unreachable message will be issued
Values 1 to 9999
Values 1 to 9999
recommended that entries be numbered in staggered increments. This allows users to insert a new
entry in an existing policy without having to renumber the existing entries.
Values 1 to 9999
7705 SAR OS System Management Guide