Alcatel-Lucent 7705 SAR-8 System Management Manual page 114

Security Command Reference
cannot-change-password
Syntax [no] cannot-change-password
Context config>system>security>user user-name>console
Description This command allows a user to change their password for both FTP and console login.
To disable a user's privilege to change their password, use the cannot-change-password form of the
command.
Note that the cannot-change-password flag is not replicated when a user copy is performed. A new-
password-at-login flag is created instead.
Default no cannot-change-password
login-exec
Syntax [no] login-exec url-prefix:source-url
Context config>system>security>user user-name>console
config>system>security>user-template>console
Description This command configures a user's login exec file, which executes whenever the user successfully
logs in to a console session.
Only one exec file can be configured. If multiple login-exec commands are entered for the same user,
each subsequent entry overwrites the previous entry.
The no form of the command disables the login exec file for the user.
Default
No login exec file is defined.
Parameters url-prefix: source-url — enter either a local or remote URL, up to 200 characters in length, that
member
Syntax member user-profile-name [user-profile-name...]
no member user-profile-name
Context config>system>security>user user-name>console
Description This command allows the user access to a profile.
A user can participate in up to eight profiles.
The no form of this command deletes access user access to a profile.
Page 114
identifies the exec file that will be executed after the user successfully logs in
7705 SAR OS System Management Guide