Alcatel-Lucent 7705 SAR-8 System Management Manual page 248

Log Command Reference
Accounting Policy Commands
accounting-policy
Syntax accounting-policy policy-id [interval minutes]
no accounting-policy policy-id
Context config>log
Description This command creates an access accounting policy.
An accounting policy defines the accounting records that are created.
Access accounting policies are policies that can be applied to one or more service access points
(SAPs). Changes made to an existing policy, using any of the sub-commands, are applied
immediately to all SAPs where this policy is applied.
If an accounting policy is not specified on a SAP, then accounting records are produced in accordance
with the access policy designated as the default. For more information, see the
The no form of the command deletes the policy from the configuration. The accounting policy cannot
be removed unless it is removed from all the SAPs or channels where the policy is applied.
Default No default accounting policy is defined.
Parameters policy-id — the policy ID that uniquely identifies the accounting policy, expressed as a decimal
interval minutes — the interval, in minutes, in which statistics are collected and written to their
Page 248
integer
Values
1 to 99
destination
The default interval for each record type is defined in the record record-name description.
Default As defined in the record name description.
Values
5 to 120
7705 SAR OS System Management Guide
default
command.