Alcatel-Lucent 7705 SAR-8 System Management Manual page 278

Log Command Reference
notify-community communityName | snmpv3SecurityName — specifies the community string for
community — the community string as required by the snmpv1 or snmpv2c trap receiver. The
security-name — the security-name as defined in the config>system>security>user context for
security-level {no-auth-no-privacy | auth-no-privacy | privacy} — specifies the required
Page 278
The keyword snmpv2c selects the SNMP version 2c format. When specifying snmpv2c, the
notify-community parameter must be configured for the proper SNMP community string that
the trap receiver expects to be present in alarms and traps messages. If the SNMP version is
changed from snmpv3 to snmpv2c, then the notify-community parameter must be changed to
reflect the community string rather than the security-name that is used by snmpv3.
The keyword snmpv3 selects the SNMP version 3 format. When specifying snmpv3, the notify-
community parameter must be configured for the SNMP security-name. If the SNMP version is
changed from snmpv1 or snmpv2c to snmpv3, then the notify-community parameter must be
changed to reflect the security-name rather than the community string used by snmpv1 or
snmpv2c.
Default
snmpv3
Values
snmpv1, snmpv2c, snmpv3
snmpv1 or snmpv2c, or the snmpv3 security-name. If no notify-community is configured, then
no alarms or traps will be issued for the trap destination. If the SNMP version is modified, the
notify-community must be changed to the proper form for the SNMP version.
community string can be an ASCII string up to 32 characters in length.
SNMP v3. The security-name can be an ASCII string up to 32 characters in length.
authentication and privacy levels required to access the views configured on this node when
configuring an snmpv3 trap receiver.
The keyword no-auth-no-privacy specifies that no authentication and no privacy (encryption)
are required.
The keyword auth-no-privacy specifies that authentication is required but no privacy
(encryption) is required. When this option is configured, the security-name must be configured
for authentication.
The keyword privacy specifies that both authentication and privacy (encryption) are required.
When this option is configured, the security-name must be configured for authentication and
privacy.
Default No default. The security level must be specified when configuring an SNMPv3 trap
reciever.
Values no-auth-no-privacy, auth-no-privacy, privacy
7705 SAR OS System Management Guide