Alcatel-Lucent 7705 SAR-8 System Management Manual page 263

Parameters eq | neq | lt | lte | gt | gte — this operator specifies the type of match. Valid operators are listed in the
severity-level — the ITU severity level number. The following table lists severity levels and
subject
Syntax subject {eq | neq} subject [regexp]
no subject
Context config>log>filter filter-id>entry entry-id>match
Description This command adds an event subject as a match criterion.
The subject is the entity for which the event is reported, such as a port. In this case, the port-id string
would be the subject.
Only one subject command can be entered per event filter entry. When multiple subject commands
are entered, the last command overwrites the previous command.
The no form of the command removes the subject match criterion.
7705 SAR OS System Management Guide
table below.
Operator
eq
neq
lt
lte
gt
gte
corresponding numbers per ITU standards M.3100 X.733 & X.21 severity levels.
Severity Number
1
2
3
4
5
6
Event and Accounting Logs
Notes
Equal to
Not equal to
Less than
Less than or equal to
Greater than
Greater than or equal to
Severity Level
cleared
indeterminate (info)
critical
major
minor
warning
Page 263