Alcatel-Lucent 7705 SAR-8 System Management Manual page 106

Security Command Reference
numeric — specifies that at least one numeric character must be present in the password. This
special-character — specifies that at least one special character must be present in the password.
health-check
Syntax [no] health-check
Context config>system>security>password
Description This command specifies that RADIUS and TACACS+ servers are monitored for 3 seconds each at
30-second intervals. Servers that are not configured will have 3 seconds of idle time. If in this process
a server is found to be unreachable, or a previously unreachable server starts responding, depending
on the type of server, a trap will be sent.
The no form of the command disables the periodic monitoring of the RADIUS and TACACS+
servers. In this case, the operational status for the active server will be up if the last access was
successful.
Default health-check
minimum-length
Syntax minimum-length value
no minimum-length
Context config>system>security>password
Description This command configures the minimum number of characters required for locally administered
passwords, HMAC-MD5-96, HMAC-SHA-96, and des-keys configured in the
config>system>security context.
If multiple minimum-length commands are entered, each command overwrites the previously
entered command.
The no form of the command reverts to the default value.
Default minimum-length 6
Parameters value — the minimum number of characters required for a password
Page 106
keyword can be used in conjunction with the mixed-case and special-character parameters.
However, if this command is used with the
command is rejected.
This keyword can be used in conjunction with the numeric and mixed-case parameters.
However, if this command is used with the
command is rejected.
Special characters include: ~!@#$%^&*()_+|{}:"<>?`-=\[];',./.
Values 1 to 8
authentication
authentication
7705 SAR OS System Management Guide
none command, the complexity
none command, the complexity