Alcatel-Lucent 7705 SAR-8 System Management Manual page 261

Parameters eq | neq — the operator specifying the type of match. Valid operators are listed in the table below.
application-id — the application name string
number
Syntax number {eq | neq | lt | lte | gt | gte} event-id
no number
Context config>log>filter filter-id>entry entry-id>match
Description This command adds a TiMOS application event number as a match criterion.
TiMOS event numbers uniquely identify a specific logging event within an application.
Only one number command can be entered per event filter entry. If multiple number commands are
entered, the last command overwrites the previous command.
The no form of the command removes the event number as a match criterion.
Default
no event-number
Parameters eq | neq | lt | lte | gt | gte — this operator specifies the type of match. Valid operators are listed in the
7705 SAR OS System Management Guide
Operator
eq
neq
Values
atm, chassis, debug, efm_oam, filter, gsmp, ip, ldp, logger, mpls, ntp, oam, port,
ppp, qos, route_policy, security, snmp, stp, svcmgr, system, tip, tod, user, user_db,
vrtr
table below.
Operator
eq
neq
lt
lte
gt
gte
Event and Accounting Logs
Notes
Equal to
Not equal to
Notes
Equal to
Not equal to
Less than
Less than or equal to
Greater than
Greater than or equal to
Page 261