Alcatel-Lucent 7705 SAR-8 System Management Manual page 116

Security Command Reference
Default authentication none - No authentication is configured and privacy cannot be configured.
Parameters none — do not use authentication. If none is specified, then privacy cannot be configured.
hash — when hash is not specified, unencrypted characters can be entered. When hash is configured,
md5 key-1 — the MD5 authentication key is stored in an encrypted format. The minimum key length
sha key-1 — the sha authentication key is stored in an encrypted format. The minimum key length is
privacy none — do not perform SNMP packet encryption
privacy des-key key-2 — configure the des-key for SNMP packet encryption. This key is stored in
group
Syntax group group-name
no group
Context config>system>security>user user-name>snmp
Description
This command associates (or links) a user to a group name. The
with one or more views, security model(s), security level(s), and read, write, and notify permissions.
Default
No group name is associated with a user.
Parameters group-name — enter the group name (between 1 and 32 alphanumeric characters) that is associated
Page 116
all specified keys are stored in an encrypted format in the configuration file. The password must
be entered in encrypted form when the hash parameter is used.
is determined by the config>system>security>password>minimum-length value. The
maximum length is 16 octets (32 printable characters).
The complexity of the key is determined by the complexity command.
determined by the config>system>security>password>minimum-length value. The maximum
length is 20 octets (40 printable characters).
The complexity of the key is determined by the complexity command.
an encrypted format . The minimum key length is determined by the
config>system>security>password>minimum-length value. The maximum length is 16 octets
(32 printable characters). If privacy is configured, then authentication must be enabled.
To remove a previously configured des-key, enter privacy none.
The complexity of the key is determined by the complexity command.
Default privacy none
with this user. A user can be associated with one group name per security model.
7705 SAR OS System Management Guide
access
command links the group