Alcatel-Lucent 7705 SAR-8 System Management Manual page 268

Log Command Reference
Parameters syslog-level — the threshold severity level name. Values are described in the table below.
log-prefix
Syntax log-prefix log-prefix-string
no log-prefix
Context config>log>syslog syslog-id
Description
This command adds the string prepended to every syslog message sent to the syslog host.
RFC 3164, The BSD syslog Protocol, allows an alphanumeric string (tag) to be prepended to the
content of every log message sent to the syslog host. This alphanumeric string can, for example, be
used to identify the node that generates the log entry. The software appends a colon (:) and a space to
the string and it is inserted in the syslog message after the date stamp and before the syslog message
content.
Only one string can be entered. If multiple strings are entered, the last string overwrites the previous
string. The alphanumeric string can contain lowercase (a-z), uppercase (A-Z) and numeric (0-9)
characters.
The no form of the command removes the log prefix string.
Default
no log-prefix
Page 268
Values emergency, alert, critical, error, warning, notice, info, debug
7705 SAR Syslog Severity
Severity Level Level
(highest to lowest)
3 critical
4 major
5 minor
6 warning
1 cleared
2 indeterminate
Values 0 to 7
Configured
Severity
0 emergency
1 alert
2 critical
3 error
4 warning
5 notice
6 info
7 debug
7705 SAR OS System Management Guide
Definition
System is unusable
Action must be taken
immediately
Critical condition
Error condition
Warning condition
Normal but significant condition
Informational messages
Debug-level messages