Alcatel-Lucent 7705 SAR-8 System Management Manual page 178

SNMP Command Reference
security-level auth-no-privacy — specifies that authentication is required but privacy (encryption)
security-level privacy — specifies that both authentication and privacy (encryption) is required.
context context-name — specifies a set of SNMP objects that are associated with the context-name
prefix-match — specifies the context-name prefix-match keywords, exact or prefix
read view-name-1 — specifies the keyword and variable of the view to read the MIB objects.
write view-name-2 — specifies the keyword and variable of the view to configure the contents of the
notify view-name-3 — specifies the keyword and variable of the view to send a trap about MIB
attempts
Syntax attempts [count] [time minutes1] [lockout minutes2]
no attempts
Context config>system>security>snmp
Description This command configures a threshold value for the number of unsuccessful SNMP connection
attempts allowed in a specified time frame. The command parameters are used to counter denial of
service (DOS) attacks through SNMP.
If the threshold is exceeded, the host is locked out for the lockout time period.
If multiple attempts commands are entered, each command overwrites the previously entered
command.
The no form of the command resets the parameters to the default values.
Default attempts 20 time 5 lockout 10
Page 178
is not required. When this option is configured, both the group and the user must be configured
for authentication.
When this option is configured, both the group and the user must be configured for
authentication. The user must also be configured for privacy.
The context-name is treated as either a full context-name string or a context-name prefix
depending on the keyword specified (exact or prefix).
Default
exact
This command must be configured for each view to which the group has read access.
Values up to 32 characters
agent. This command must be configured for each view to which the group has write access.
Values up to 32 characters
objects. This command must be configured for each view to which the group has notify access.
Values up to 32 characters
7705 SAR OS System Management Guide