idronaut Ocean Seven 304Plus Operator's Manual page 8

Ctd probe
Table of Contents

Advertisement

liable for any errors or for incidental or consequential damages in connection with the furnishing,
performance or use of this manual or the examples herein. The information in this document is subject to
change without notice.
Cleaning Instructions
Before the returned OCEAN SEVEN 304Plus can be serviced, equipment exposed to biological, radioactive,
or toxic materials must be cleaned and disinfected. Biological contamination is presumed for any instrument,
CTD, or other device that has been used with wastewater. Radioactive contamination is presumed for any
instrument, CTD or other device that has been used near any radioactive source. If an OCEAN SEVEN
304Plus CTD, or other part is returned for service without following the cleaning instructions, and if in our
opinion it represents a potential biological or radioactive hazard, our service personnel reserve the right to
withhold service until appropriate cleaning, decontamination has been completed.When service is required,
either at the user's facility or at IDRONAUT, the following steps must be taken to insure the safety of our
service personnel.
In a manner appropriate to each device, decontaminate all exposed surfaces, including any
containers. 70% isopropyl alcohol or a solution of 1/4 cup bleach to 1-gallon tap water are suitable
for most disinfecting. Instruments used with wastewater may be disinfected with 5% Lysol if this is
more convenient to the user.
The user shall take normal precautions to prevent radioactive contamination and must use
appropriate decontamination procedures should exposure occur. If exposure has occurred, the
customer must certify that decontamination has been accomplished and that no radioactivity is
detectable by survey equipment.
Any product being returned to the IDRONAUT S.r.l. laboratory for service or repair should be
packed securely to prevent damage.
Cleaning must be completed on any product before returning it to IDRONAUT S.r.l.
Disposal of Waste Equipment by Users in the European Union
The recycling bin symbol on the product or on its packaging indicates that this product must not be disposed
of with your other waste. It is your responsibility to dispose of your waste equipment by handling it over to
a designated collection point for the recycling of waste electrical and electronic equipment. The separate
collection and recycling of your waste equipment at the time of disposal will help to conserve natural
resources and ensure that it is recycled in a manner that protects human health and the environment. For
more information about where you can drop off your waste equipment for recycling, please contact your
local city office, your waste disposal service.
IDRONAUT – Brugherio (MB)
OCEAN SEVEN 304Plus CTD
12-2015

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents