Ctd Start-Up Non-Verbose Operating Mode; The Main Menu - idronaut Ocean Seven 304Plus Operator's Manual

SECTION TWO – INSTALLATION AND START-UP
OCEAN SEVEN 304Plus - ID:304-0010101 {USR}[9.0_00-02/2012] 14:19:42.01 11-07-2012
Work.Mem:Cnf[oK].Calb[oK].Stat[oK].WakeUp[9F]
Data memory...[1 GByte]
WarmUp-
Battery..3.59 VDC....CTD..Ok Analogue:.Ok
OperatingMode...Operator
Main menu
[0]ShutDown
[1]Acquisition
[2]Memory
[3]Calibration
[4]Service
[5]Op.mode
cmd>

2.4.2. CTD Start-up Non-verbose operating mode

Once the CTD is switched on, it enters in the non-verbose operating mode.
OCEAN SEVEN 304Plus - ID:304-0010101 {USR}[9.0_00-02/2012] 14:21:09.01 11-07-2012
Work.Mem:Cnf[oK].Calb[oK].Stat[oK].WakeUp[9F]
Data memory...[1 GByte]
WarmUp-
Battery..3.59 VDC....CTD..Ok Analogue:.Ok
OperatingMode...PTProtocol
PTPProtocol
ER 000
Once the "non-verbose operating mode" is active, type VT <LF> to reactivate the "verbose operating
mode". When the CTD is turned on, it keeps the operating mode of the last ON period. So, in case
the CTD is turned off in the "non verbose operating mode", no menu will appear on the screen. In
that case, the command VT<LF> must be typed in order to return to the "verbose operating mode".
2.5.

THE MAIN MENU

When the initialization process is completed, the OCEAN SEVEN 304Plus Main Menu is shown on the
user's screen:
Main menu
[0]ShutDown
[1]Acquisition
[2]Memory
[3]Calibration
[4]Service
[5]Op.mode
The CTD accepts the following keys in input, detailed as follows:
[0] – this key switches off the CTD. Then, the magnetic switch must be rotated to the OFF position.
[1] - this key gives access to the DATA ACQUISITION function.
[2] - this key gives access to the MEMORY MENU.
[3] - this key gives access to the Probe CALIBRATION MENU.
[4] - this key gives access to the SERVICE MENU.
[5] - this key gives access to the Non-Verbose communication protocol.
IDRONAUT – Brugherio (MB)
OCEAN SEVEN 304Plus CTD
16
12-2015