Continuous Sampling - idronaut Ocean Seven 304Plus Operator's Manual

SECTION THREE – COMMANDS
Data acquisition step: 00:01:00[hh:mm:ss]<
DataSet per acquisition:5 <
Number of acquisition cycle:0 < 10
First acquisition time: 00:00:00[hh:mm:ss]<
Do you confirm the above setup [1(Yes,0(No] ?
Confirm ?:0 < 1
OpenLOG(3)..oK
TimeAcquisition
Acquisition: <^C>Stop
Press Temp Cond Sal
0.28 25.7098 1.3624 1.2340 15:35:38.37M
0.28 25.7098 1.3624 1.2340 15:35:38.63M
0.28 25.7100 1.3624 1.2340 15:35:38.90M
0.28 25.7105 1.3624 1.2340 15:35:39.19M
0.27 25.7111 1.3624 1.2340 15:35:39.46M
Timed Acquisition cycles left: 9
NextACQTime 15:36:37.48 11-07-2012
OS304Plus Shutdown
The timed profile parameters are described in section 4.0.
Here is an example of messages sent by the CTD once it carries out a time cycle.
OCEAN SEVEN 304Plus - ID:304-0010101 {USR}[9.0_00-02/2012] 15:37:37.01 11-07-2012
Work.Mem:Cnf[oK].Calb[oK].Stat[oK]..WakeUp[9F]
Data memory...[1 GByte]
WarmUp-
Battery..3.60 VDC....CTD..Ok Analogue:.Ok
OperatingMode...Timed
TimeAcquisitionAcquisition: <^C>Stop
Press Temp Cond Sal
0.28 25.7565 1.3629 1.2340 15:37:41.02M
0.28 25.7562 1.3629 1.2340 15:37:41.29M
0.28 25.7558 1.3628 1.2340 15:37:41.56M
0.28 25.7555 1.3628 1.2340 15:37:41.83M
0.28 25.7551 1.3628 1.2340 15:37:42.12M
Timed Acquisition cycles left: 7
NextACQTime 15:38:37.14 11-07-2012
OS304Plus Shutdown
WARNING
The configuration of zero or negative parameters could cause the CTD to behave in an unpredictable way.

3.2.4. Continuous Sampling

The CTD continuously acquire and store data from the sensors accordingly with the configured data
rate. This command is interrupted upon receipt of the "Stop Acquisition" (CTRL-C). More continuous
sampling cycles can be performed by acting on the CTD ON/OFF switch.
An example of CTD configuration messages follows:
OCEAN SEVEN 304Plus - ID:304-0010101 {USR}[9.0_00-02/2012] 16:14:51.70 11-07-2012
Continuous acquisitions
Data acquisition scan rate [125ms]:250 <
Probe Switch-Off by itself.
The next probe Wake-UP will start the configured acquisitions
OS304Plus Shutdown
IDRONAUT – Brugherio (MB)
OCEAN SEVEN 304Plus CTD
19
12-2015