Laboratory Standard Rs232C Interface - idronaut Ocean Seven 304Plus Operator's Manual

SECTION ONE – SYSTEM DESCRIPTION
1.3.

LABORATORY STANDARD RS232C INTERFACE

The RS232C interface allows direct connection between the CTD and a personal computer by means of
the six-pole male connector located on the top end cap of the CTD. RS232 cable, up to 200m long, can
be prepared upon request. Two different connectors, cable combinations are possible depending on
the type of the CTD housing. The below pictures and wiring diagrams show both standard laboratory
cables.
IDRONAUT – Brugherio (MB)
OCEAN SEVEN 304Plus CTD
2
12-2015