3.2.4. Configuration Menu — Full Segments Display Test
The fourth configuration menu (see Figure 3-9) allows users to test the full
segments display. This allows a complete review of the display segments and to
inform the user of all possible segments in the current Emerson Programmable
Touchscreen Thermostat revision. Press the check icon to go to the next parameter.
Figure 3-9 - Full Segments Display Test
3.2.5. Configuration Menu — System Revision Display
The fifth and last configuration menu (see Figure 3-10) allows users to obtain the
current system revision number. This number is shown with 3 digits. Note that there
is no decimal after the first digit, but the revision number contains the decimal point.
For example, revision number 100 shown on the display means in fact 1.00. The
software revision will be updated for the latest official release, and will likely be
higher than 1.00. Press the check icon to terminate the configuration menus. Press
CA to cancel any previous change and return to the normal display without saving.
Figure 3-10 - System Revision Display (For revision 1.00)
Configuration Menu
Operation • 15