Installer Configuration Menu - Emerson 1F95-1277 Installation And Operating Instructions Manual

INSTALLER/CONFIGURATION MENU
To enter the menu: Press the Menu touch key. Press and hold for 5 seconds the Installer Config touch key. This displays
screen reference #1 in the table below. Screen Reference numbers appear in top right corner of display. Press
to the next menu item or
not available if selected for Non-Programmable. Write the options selected in the "Option Selected" column of the menu.
Installer Note: To default the programming, clock and Configuration Menu to the Factory Default Settings, press the
and SYSTEM keys simultaneously. The thermostat display will go blank for a few seconds, and then all segments will display
momentarily. For heat pump systems, Configuration Menu items 1 and 3 must be set to match the heat pump system.
Screen
Press
SS1 HP1
Reference
key
MS2 HP2
Number
1  
2  
3 
4  
5  
6 

7
 
8  
9
 
10

11  
12  
13  
14
 
15
 
16  
17  
18  
19  
20
 
21  
22
 
23  
24
 
25
 
26  
27
 
28
 
29  
30  
31  
32  
to return to a previous menu item. Press
CONFIGURATION MENU
Displayed
Press
Factory
to select from
(Default)
listed options
MS 2 HP 1, HP 2, SS 1
(GAS) ELE
0b (0) b
Days, (7) P 5 or 0
(4) PS 2
Cool-Off- Cool-Off-Heat, Heat Off,
Heat-Auto Heat, Cool-Off, Auto Off
Cool-Off-Heat- Cool-Off-Heat-Em,
Em-Auto Off-Em-Auto
(On) E OFF
(FA) Heat, Cr SL
(FA) Cool, Cr SL
(FA) Cr/AU, Em SL
(OFF) SC
On
(OFF) CL
On
(OFF) dL On
0 5, LO to 5, HI
(Temperature)
°F °C
(On) b
OFF
(On) dS
OFF
(On) Heat, AS OFF
(On) Cool, AS OFF
(OFF) CS On
CS Cool Savings 1-2-3-4-5-6
(3)
(Off) CO On
(OFF) CA On
(99) Heat, HL 62-98
(45) Cool, LL 46-82
L (total), P (partial),
OFF,
Temperature Limit
Keypad Lockout
(limited temperature range)
000 001-999
(On) Heat, FS OFF
(On) Cool, FS OFF
Remote (OFF) On
Remote, In Outdoor Remote
(On) LS OFF
or to change a menu item option. Shaded items are
or
Comments
Selects Multi-Stage (MS2, No Heat Pump), Heat Pump 1
(HP1, 1 compressor), Heat Pump 2 (HP2, 2 compressor
or 2 speed compressor), or Single Stage.
GAS setting: furnace controls blower.
ELE setting: thermostat controls blower.
Selects Reversing Valve (This item is only to appear if HP1 or HP2
is selected above.)
Programs per week. (7 days, 5+1+1 days or non-programmable)
Programs per day.
4 = Morning, Day, Evening, Night
2 = Day, Night
Not available if 4 is 0
System switch configuration in non heat pump mode.
System switch configuration, heat pump mode.
Selects Energy Management Recovery. Not available if 4 is 0
Selects Adjustable Anticipation, cycle rate, Heat
Selects Adjustable Anticipation, cycle rate, Cool
Selects Adjustable Anticipation, cycle rate auxiliary, (This item is
only to appear if HP1 or HP2 is selected above).
Select stage cycle completion On or Off.
Selects Compressor Lockout.
Selects Continuous Display backlight.
Selects Adjustable Ambient Temperature Display [range -5 (LO) to
+5 (HI)].
Selects °F/°C Display (temperature units in Fahrenheit or Celsius).
Selects audible Beeper On/Off.
Selects Daylight Saving Time calculation.
Selects Automatic Schedule for comfort temperature Programming,
heat mode. Not available if 4 is 0
Selects Automatic Schedule for comfort temperature Programming,
cool mode. Not available if 4 is 0
Selects Cool Savings Feature On of Off.
Selects amount of Cool Savings adjustment.
Select Compressor Optimization (not available on earlier models)
Selects Comfort Alert Feature On or Off. (not available on earlier
models)
TEMPERATURE LIMIT, HEAT (max. heat set point).
TEMPERATURE LIMIT, COOL (min. cool set point).
Selects Keypad Lockout.
Selects Keypad Lockout Combination (active only if keypad Lockout
is selected).
Fast second stage of heat (not available if SS1 is selected above).
Fast second stage of cool (not available if SS1 or HP1 is selected
above).
Remote temperature sensor, enable/disable.
Remote temperature sensor (Indoor/Outdoor).
Local temp. Sensor enable/disable (only when Indoor Remote is
selected On).
to advance
,
Option
Selected
5