Wires And Electrical Connection - Emerson 810-1600 Installation And Operation Manual

To fix the baseplate on a wall, pass the wires through the opening of the baseplate,
and use either 2x self-taping screws and dry-wall anchors, or regular 6-32 machine
screws to attach on a standard single-gang electrical junction box (2" x 4").
CAUTION! Do not over-tighten the screws when attaching the baseplate on a wall as
physical damage may occur.
CAUTION! Keep the thermostat housing and vents clean and free of any debris to avoid
malfunction of the device.

2.3.3. Wires and Electrical Connection

Once the baseplate is affixed on the wall, proceed with the wiring connections to the
terminal block. Please refer to Section 2.4., Wiring and Connections for 
configuration and signals definition.
Figure 2-4 - Baseplate with Terminal Blocks Labels
Thermostat Installation Installation • 5