Table of Contents
Advertisement
4
Programmable Touchscreen
Thermostat Setup for E2 and Site
Supervisor
E2
4.1. New Installation of Description File to E2
4.1.1. Uploading the Touch_TStat Description File to E2
The Touchscreen Thermostat requires adding a description file (P/N 527-0729) to
E2. Contact Customer Service to obtain this information:
Solutions.CustomerService@Emerson.com
NOTE: Ultrasite32
upload.
1.
Connect to E2 using UltraSite32 (refer to the UltraSite32 Manual
P/N 026-1002).
2.
Launch the UltraSite program and log in.
3.
Expand UltraSite to view Directory Level and Site Level see Figure 4-1.
4.
Right-click Site Level and click Connect.
5.
Expand Site Level and locate the E2 Unit where the Touch T-Stat.dsc will be
installed.
32 • Emerson Programmable Touchscreen Thermostat I&O Manual
Software must be installed to perform a description file
026-1739 Rev 0
Hide quick links:
Advertisement
Table of Contents
