2
Installation
2.1. Enclosure
Figure 2-1 - Emerson Programmable Thermostat Enclosure
2.2. Thermostat Location
The thermostat should be mounted:
> About 5 ft (1.5 m) from the floor.
> On a part of wall without hidden pipes or ductwork.
> In a room that operating limits are within 32°F to 122°F (0°C to 50°C).
> In a room that humidity operating range is within 0% to 95% relative humidity,
non-condensing.
The thermostat should not be mounted:
> Nearby a window, on an outside wall, or next to a door leading to the outside.
> Where exposed to direct light and heat from any heat source, such as a lamp, the sun,
a fireplace, or any heating element which may cause a false reading (temperature
measurement offset).
> Nearby a direct airflow from supply registers (air vent or duct outlet).
> In areas and locations with poor air circulation such as behind a door.
Enclosure
Installation • 3