Emerson 810-1600 Installation And Operation Manual page 18

IMPORTANT! A factory reset of all parameters will occur when the system is in IDLE
configuration, except the current date and time that are kept with the use of a Real-Time
Clock (RTC). This factory reset will be triggered on the first start of the device, and when
newly configured from RTU, HP_O or HP_B to IDLE configuration.
IMPORTANT! Upon the first start of the thermostat, the default System Configuration will
be set to IDLE. This means that the first step to get the device started is to configure the
appropriate system configuration. This menu will appear by default upon the first start (See
Figure 3-5). To access the configuration menu, press the
within 15 seconds.
Figure 3-5 - Thermostat Display When in IDLE Configuration (First start or after a System
Configuration Change)
Figure 3-6 - Thermostat System Configuration Menu (First Step is IDLE)
Configuration Menu
icon for five (5) times
Operation • 13