Device And Com Port Setup In Site Supervisor; Modbus Device Setup - Emerson 810-1600 Installation And Operation Manual

5. A window will appear. Press
Address is set.
Figure 4-6 - Modbus Device Address is Set
NOTE: Refer to Section 3.2.1. to set the Device Address on the thermostat.
Site Supervisor

4.4. Device and COM Port Setup in Site Supervisor

4.4.1. Modbus Device Setup

Figure 4-7 - Modbus Device Setup for Site Supervisor
NOTE: The polarity of the MODBUS connection between Site Supervisor and
Touchscreen Thermostat is reversed.
Device and COM Port Setup in Site SupervisorProgrammable Touchscreen Thermostat Setup for E2 and Site
Supervisor • 37

and a confirmation will show MODBUS Device