Adding The Touchscreen Thermostat Application In Site Supervisor; Installing And Commissioning The Touchscreen Thermostat - Emerson 810-1600 Installation And Operation Manual

4.4.3. Adding the Touchscreen Thermostat Application in Site Supervisor

1. Click the Control Inventory icon (the box)
2. Expand the HVAC category and go to the Add Control drop-down list and select
Touch T-Stat.
Figure 4-10 - Add Controls

4.4.4. Installing and Commissioning the Touchscreen Thermostat

1. Click the Port ID drop-down list to select Modbus assigned to the Com Port selected in
Section 4.4.3.
2. Click the Address drop-down list to select the Modbus Address (default address is 1).
3. Click the Association drop-down list to select the HVACZone to associate with the
thermostat.
4. Click Update to save settings.
Figure 4-11 - Setting Up the Thermostat Update