Table of Contents
Advertisement
IMPORTANT! If time is set through Modbus network, the format to use for the time
parameter should be 24-hours (0-23). The actual time display on the thermostat will be
according to the selected time setting (12H or 24H).
Figure 3-13 - Time Format Setting
•
The second step (see Figure 3-14) is the hour field that will be flashing on top right of
the screen. To change the hours, press either the up or down arrow to the desired value,
and then press the check mark to go to the next parameter.
•
The third step (see Figure 3-14) is the minutes field that will be flashing on top right of
the screen. To change the minutes, press either the up or down arrow to the desired
value, and then press the check icon to go to the next parameter.
•
The last step (see Figure 3-14) is the day of the week that will be flashing at the top of
the screen. To change the day of the week, press either the up or down arrow to the
desired value, and then press the check mark to save the changes. Press CA to cancel
and return to the normal display without saving any changes.
Figure 3-14 - Time and Day Settings
Time and Date Setting
Operation • 17
Hide quick links:
Advertisement
Table of Contents
