Advertisement
Setup – Import example project into DAVE
1
2
After the project import you will
find this project folder structure.
1
for building, it only misses the
EtherCAT slave stack code. For
these files the Src folder has been
already prepared.
2
for the XMC4800 can be generated
by configuration files. These
configuration files are included in
the project already.
The following slides show in detail
how to define your EtherCAT slave
node interface and to generate the
slave stack code.
Copyright © Infineon Technologies AG 2016. All rights reserved.
The project is nearly complete
The EtherCAT slave stack code
11
Advertisement
