Maintenance Menu; Items In The Maintenance Menu - Sony PDW-V1 Operation Manual

7-4 Maintenance Menu

7-4-1 Items in the Maintenance Menu

The maintenance menu includes the following items.
In the table, the underscored items are the factory default
settings.
Item
DATA LENGTH
NON-AUDIO INPUT
Sub-item
1 tr1/tr2
2 tr3/tr4
3 tr5/tr6
4 tr7/tr8
Item
DHCP
IP ADDRESS PRESET
SUBNET MASK PRESET
DEFAULT GATEWAY PRESET
LINK SPEED
DUPLEX
For details of how to make settings, see "To change
network settings" (page 82).
AUDIO CONFIG: items relating to audio control
Setting
When "IMX50," "IMX40," or "IMX30" is selected in setup menu item 031, this selects the
audio quantization bit count and number of recording channels.
16 × 8: 16 bits × 8 channels
24 × 4: 24 bits × 4 channels
Note
When item 031 is set to "DVCAM," the setting is automatically fixed at 16 bits × 4 channels.
Select whether to handle digital audio signals as non-audio signals during recording.
audio: Handle as audio signals.
data: Handle as non-audio signals.
NETWORK CONFIG: items relating to network settings
Setting
Set whether to assign an IP address automatically with the DHCP server.
DISABLE: Do not assign automatically.
ENABLE: Assign automatically.
Set IP address.
192.168.001.010
Note
When DHCP is set to "ENABLE," it is not possible to set the IP address.
Set the subnet mask.
255.255.255.000
Note
When DHCP is set to "ENABLE," it is not possible to set the subnet mask.
Set the default gateway.
000.000.000.000
Note
When DHCP is set to "ENABLE," it is not possible to set the default gateway.
Set the communications speed.
AUTO, 10Mbps, 100Mbps
Set the communications method.
AUTO
Full Duplex: Full duplex
Half Duplex: Half duplex
For details about DRIVE MAINTENANCE, ADJUST,
CHECK, BATTERY CONFIG, SERVICE SUPPORT, and
OTHERS, refer to the Maintenance Manual.
79
7-4 Maintenance Menu