Basic Setup Menu; Items In The Basic Setup Menu - Sony PDW-V1 Operation Manual

7-2 Basic Setup Menu

7-2-1 Items in the Basic Setup Menu

The basic menu items (excluding the items related to the
digital hours meter) are listed in the following table.
Item number Item name
001 PREROLL TIME
002 CHARACTER H-
POSITION
003 CHARACTER V-POSITION Adjust the vertical screen position (as a hexadecimal value) of the text information
005 DISPLAY INFORMATION
SELECT
006 LOCAL FUNCTION
ENABLE
007 TAPE TIMER DISPLAY
009 CHARACTER TYPE
In the Settings column of the table, underlined values
indicate the factory default settings.
Settings
0S... 5S ...30S: Set the preroll time to between 0 and 30 seconds in steps of 1
second.
A preroll time of at least 5 seconds is recommended when using this unit for
editing.
Adjust the horizontal screen position (as a hexadecimal value) of the text
information output from the VIDEO OUT connector and SDI OUT connector for
superimposed display on the monitor.
00... 0A ...2A (525(U)/525(J)-line modes) /00... 09 ...29 (625-line mode): The
hexadecimal value 00 is for the far left of the screen. Increasing the value
moves the position of the characters to the right.
When setting this item, watch the monitor screen, and adjust to the required state.
output from the VIDEO OUT connector and SDI OUT connector for superimposed
display on the monitor.
00... 2E ...38 (525(U)/525(J)-line modes)/00... 37 ...43 (625-line mode): The
hexadecimal value 00 is for the top of the screen. Increasing the value lowers
the position of the characters.
When setting this item, watch the monitor screen, and adjust to the required state.
Determine the kind of text information to be output from the VIDEO OUT
connector and SDI OUT connector.
T&sta : Time data and the units status.
T&UB: Time data and user bit data. (When UB is selected with the COUNTER
button, the user bit data and time data arranged in that order are displayed.)
T&CNT: Time data and counter count. (When COUNTER is selected with the
COUNTER button, the counter count and time data arranged in that order are
displayed.)
T&T: Time data and time code (TC or VITC).
T&clp: Time code and clip name
time: Time code (TC or VITC) only.
Determine which recording and playback control buttons on the control panel are
enabled when this unit is controlled from external equipment.
dis: All buttons and switches are disabled.
st&ej : Only the STOP button and EJECT button are enabled.
ena: All buttons and switches are enabled.
Determine whether to display the counter in 12-hour mode or 24-hour mode.
+ –12H : 12-hour mode
24H: 24-hour mode
Determine the type of characters such as time code output from the VIDEO OUT
connector and SDI OUT connector for superimposed display on the monitor.
white: White letters on a black background.
black: Black letters on a white background.
W/out: White letters with black outline.
B/out: Black letters with white outline.
When setting this item, watch the monitor screen, and adjust to the required state.
67
7-2 Basic Setup Menu