Table of Contents
Advertisement
7-4 Maintenance Menu
7-4-1 Items in the Maintenance Menu
The following tables show the items in the maintenance
menu.
• Item names are the names which appear in the image
display.
• The values in the Settings column are the values which
appear in the time data display section. (The values may
appear in a different format in the image display. In this
Item
DATA LENGTH
NON-AUDIO INPUT
Sub-item
tr1/tr2
tr3/tr4
tr5/tr6
tr7/tr8
Item
DHCP
IP ADDRESS PRESET
SUBNET MASK PRESET
DEFAULT GATEWAY PRESET
LINK SPEED
86
7-4 Maintenance Menu
AUDIO CONFIG: items relating to audio control
Setting
When "IMX50," "IMX40," or "IMX30" is selected in setup menu item 031, this selects the
audio quantization bit count and number of recording channels.
16×8 (16bit × 8ch): 16 bits × 8 channels
24×4 (24bit × 4ch): 24 bits × 4 channels
Note
When item 031 is set to "DVCAM," the setting is automatically fixed at 16 bits × 4 channels.
Select whether to handle digital audio signals as non-audio signals during recording.
Audio (audio): Handle as audio signals.
data: Handle as non-audio signals.
NETWORK CONFIG: items relating to network settings
Setting
Set whether to assign an IP address automatically with the DHCP server.
DISABLE: Do not assign automatically.
ENABLE: Assign automatically.
Set IP address.
192.168.001.010
Note
When DHCP is set to "ENABLE," it is not possible to set the IP address.
Set the subnet mask.
255.255.255.000
Note
When DHCP is set to "ENABLE," it is not possible to set the subnet mask.
Set the default gateway.
000.000.000.000
Note
When DHCP is set to "ENABLE," it is not possible to set the default gateway.
Set the communications speed.
AUTO, 10Mbps, 100Mbps
case, the image display values are shown in
parentheses.) Underlined values are the factory defaults.
For details about DRIVE MAINTENANCE, ADJUST,
CHECK, BATTERY CONFIG, SERVICE SUPPORT, and
OTHERS, refer to the Maintenance Manual.
Advertisement
Table of Contents
