Clip List Operations; Displaying The Clip Menu; Saving The Current Clip List To Disc51 - Sony PDW-V1 Operation Manual

This deletes the sub clip, and the screen returns to the
sub clip thumbnail display.
Saving edited clip lists to disc
The operations described above (moving, trimming, and
deleting sub clips) are carried out on the current clip list.
Execute the procedure in 5-3-2 "Saving the Current Clip
List to Disc" (page 51) to save the current clip list to disc
again as a clip list.
Note
Unless the current clip list has been saved to disc, its
contents will be lost when a disc is ejected or the unit is
powered off. After creating a clip list, be sure to save it.

5-3 Clip List Operations

5-3-1 Displaying the CLIP Menu

Proceed as follows.
Notes
• The CLIP menu can handle up to 99 clip lists.
• Do this operation in stop mode.
With the THUMBNAIL button off, hold down the SHIFT
button and press the SUBCLIP button.
The CLIP menu appears.
CLIP MENU
LOAD
SAVE
DELETE
CLEAR
TC PRESET
Use this menu to carry out the following operations.
• Save the current clip list to disc.
• Load a clip list on disc into the current clip list.
• Delete a clip list from disc.
• Clear the current clip list.
• Set the start timecode of the current clip list.
5-3-2 Saving the Current Clip List to
Disc
Proceed as follows.
1
In the CLIP menu, use the up and down arrow buttons
to move the cursor to SAVE and press the right arrow
button.
A list of clip lists appears.
"NEW FILE" is shown for lists which do not exist on
the disc, having names only.
The date of creation or the title of each clip list is
shown in the list of clip lists. (The date of creation is
always shown for clip lists without titles.)
To switch between the date and the title
Hold down the SHIFT button and press the SET
button.
51
5-3 Clip List Operations