Sony PDW-V1 Operation Manual page 90

Message in time Display
data display
condition
No Clip! limit
No Clip! off
Disc Top! limit
Disc End! limit
MAX# SB CLP off
CL OVER DUR off
Run Salvage off
No SEL List limit
No SUB Clip limit
SB CLP mode limit
SUB CLIP NG limit
No List! off
STOP ONCE! limit
STOP ONCE! off
No EM Space off
EM Full! off
90
8-3 Alarms
Description
a)
A playback or search button was pressed
for a disc containing no recorded clips.
An attempt was made to delete a clip
from a disc containing no recorded clips.
The PREV button was pressed while
stopped at the top of the disc, or an
attempt was made to perform a high-
speed reverse search.
The NEXT button was pressed while
stopped at the end of the disc, or an
attempt was made to perform a high-
speed forward search.
An attempt was made to add a sub clip
when the number of registered sub clips
had already reached the upper limit
(300) of the specifications of this unit.
An attempt was made to add a sub clip
when the total duration of sub clips in the
clip list had already reached the upper
limit (24 hours) of the specifications of
this unit.
A recording, E-E display, record an
essence mark, or add a quick scene
selection sub clip was attempted on a
disc which requires clip recovery
(salvage).
The SUBCLIP button was pressed
without loading a clip list from the disc
into the current clip list.
A button in the playback control section
was pressed when there were no sub
clips in the current clip list.
The SHIFT button and the THUMBNAIL
button were pressed together with the
SUBCLIP button lit.
The SHIFT and SET buttons were
pressed together when IN and OUT
points were not set correctly (the OUT
point was set before the IN point, etc.).
An attempt was made to delete a clip list
with no clip lists saved on the disc.
The SUBCLIP button was pressed
during playback of a clip list.
An attempt was made to display the
CLIP menu during playback.
Recording of an essence mark failed
because the number of essence marks
recorded on the disc reached the upper
limit of the specifications of this unit.
An attempt was made to add an essence
mark with the number of recorded
essence marks at the upper limit of the
specifications of this unit.
Action
These operations are not possible.
These operations are not possible.
Try the operation again after executing
the salvage function.
For details, see 3-6-7 "Using the Salvage
Function" (page 38).
Try the operation again after loading a
clip list.
For details, see 5-3-3 "Loading a Clip List
From Disc Into the Current Clip List"
(page 52).
Playback is not possible without a sub
clip in the current clip list.
Press the SUBCLIP button, turning it off,
and try the operation again.
Set the IN and OUT points correctly and
try the operation again.
This operation is not possible.
Try the operation again after stopping
playback.
Use the PDZ-1 Proxy Browsing Software
to delete unneeded essence marks.