Error Messages; Alarms; Alarm List - Sony PDW-V1 Operation Manual

8-2 Error Messages

Error codes appear in the time data display when an error
(usually a hardware problem) occurs. Error codes and error
messages appear on the image display.
When an error message appears, follow the instructions in
the error message to resolve the problem.
Error code
Error code in time data display
Error code
ERROR
AN ERROR HAS BEEN
DETECTED. INFORM SERVICE
OF FOLLOWING CODE:
50-010
PRESS EJECT KEY
TO EJECT DISC.
Error message on image display
Error code

8-3 Alarms

An alarm (warning message) appears in the time data
display when an operation is attempted which is
inappropriate for the settings on this unit or the state of the
disc. The image display shows the alarm message and also
the action to take to resolve the problem.
Alarm in time data display
ALARM
REMOTE MODE IS SELECTED.
SET REMOTE/LOCAL/NETWORK
SWITCH TO LOCAL.
Alarm on image display

8-3-1 Alarm List

The following tables list the alarms displayed by this unit,
categorized according to the state of the unit when the
alarms occur.
The setting of basic menu item 016 "ALARM DISPLAY"
determines whether or not some of these alarms appear.
The "Display condition" column in the tables shows
whether the alarm is displayed according to or regardless
of the setting of menu item 016.
off: Always display, regardless of the setting.
limit: Display when the setting is "limit" or "on."
on: Display only when the setting is "on."
See 7-2-2 "Basic Menu Operations" (page 69) for more
information about how to set menu item 016.
8-2 Error Messages / 8-3 Alarms
87