Sony PDW-V1 Operation Manual page 70

To change the currently displayed sub-item
Hold down the STOP button, and turn the jog dial or
shuttle dial.
The sub-item number changes at a rate depending on the
jog dial rotation rate or on the shuttle dial position.
Sub-item number (flashing while changing)
Changing a menu item setting value
To change the setting value of the currently displayed
menu item, do as follows.
AUDIO MONITOR
L
CH-1 CH-2 CH-3 CH-4
R
ACCESS
SUB
CLIP THUMBNAIL MENU
NETWORK
LOCAL
REMOTE
CLIP ESSENCE SYSTEM
MENU MENU
MARK
PREV PLAY NEXT
TOP F REV F FWD END
1
Hold down the SHUTTLE button, and turn the jog dial
or shuttle dial.
The setting value changes at a rate depending on the
jog dial rotation rate or on the shuttle dial position.
Setting value (flashing while changing)
2
When the desired setting value is displayed, press the
SET button.
This saves the new setting value, and the menu display
disappears from the image display and status display.
70
7-2 Basic Setup Menu
2 1
SHUTTLE JOG
L
CH-5 CH-6 CH-7 CH-8
R
SET RESET SHIFT
MARK1
S.SEL
STOP
IN OUT
MARK2
To abandon making a change
Press the MENU button before pressing the SET
button.
The menu display disappears from the image display
and status display without the new setting value being
saved.
Resetting the menu settings to their
factory default values
To reset the current active menu settings to their factory
default values, do as follows.
1 3
AUDIO MONITOR
L
CH-1 CH-2 CH-3 CH-4 CH-5 CH-6
R
ACCESS
SUB
CLIP THUMBNAIL MENU SET
NETWORK
LOCAL
REMOTE
CLIP ESSENCE SYSTEM S.SEL
MENU MARK MENU
PREV PLAY NEXT STOP
IN
TOP F REV F FWD END
1
Press the MENU button.
The menu appears in the image display and status
display.
2
Press the RESET button.
A message "INITIALIZE ALL ITEMS TO
FACTORY RESET VALUES?" appears in the image
display and a message "Init setup" appears in the status
display.
To abandon operations and return to the setup
menu display
Press the RESET button again.
3
Press the SET button.
The menu settings are reset to their factory default
settings.
Switching between 525(U)-line, 525(J)-line
and 625-line modes (menu item 013)
To switch between 525(U)-line, 525(J)-line and 625-line
operation modes, do as follows.
1
Press the MENU button.
2
Turn the jog dial or shuttle dial to display menu item
013 in the time data display.
2
SHUTTLE JOG
L
CH-7 CH-8
R
RESET SHIFT
MARK1
OUT
MARK2