Connections For Using Pdz-1 Proxy Browsing Software - Sony PDW-V1 Operation Manual

When connecting to the VIDEO OUT or SDI OUT connector
Connect a video monitor as example 1 or 2 shown in the
following figure.
Video monitor

3-1-2 Connections for Using PDZ-1 Proxy Browsing Software

Using the supplied PDZ-1 Proxy Browsing Software, you
can carry out simple editing with proxy AV data.
For an overview of PDZ-1 and how to install the software,
see 5-4 "Using PDZ-1 Proxy Browsing Software" on page
Using the (network) connector (FTP connection)
The following shows an example of an FTP (File Transfer
Protocol) connection.
Note
To use PDZ-1 requires the PDW-V1 IP address and other
network-related settings to be made beforehand.
Connecting this unit directly to a laptop computer
Laptop computer
30
3-1 Connections and Settings
To composite video input connector
1
2
To SDI input connector
(network) connector
To network connector
1, 2: 75 Ω coaxial cable (not supplied)
VIDEO OUT
S400
MONITOR
To superimpose the time code, menu settings, alarm
messages, or other text information on the video signal,
press the CHARACTER button (see page 26).
54.
For information about how to use the software, refer to the
Help provided in the software.
For details of the network-related settings, see "To
change network settings" (page 82).
1: Network cable (not supplied)
(Use a crossing cable.)
S400
MONITOR
1
Make sure the remote control switch (see page
20) is set to NETWORK.
PDW-V1
VIDEO OUT AUDIO MONITOR OUT SDI OUT
L R
SDI OUT
PDW-V1
VIDEO OUT AUDIO MONITOR OUT SDI OUT
L R