Extended Menu Operatoins - Sony PDW-V1 Operation Manual

Item number Item name
802 DIGITAL AUDIO MUTING IN
SHUTTLE MODE
823 NON-AUDIO FLAG PB
Sub-item
1 CH1/CH2
2 CH3/CH4
3 CH5/CH6
4 CH7/CH8
828 SDI/DV AUDIO OUTPUT SELECT
Sub-item
1 CH1/CH2
2 CH3/CH4
831 DV OUT AUDIO MODE
Item number Item name
920 SD-SDI H-ANC CONTROL
Sub-item
1 AUDIO 5CH-8CH
2 RP188 ATC

7-3-2 Extended Menu Operatoins

The extended menu can be used with the same procedures
as in the basic menu.
However, since with the factory default settings the
extended menu is not displayed, it is first necessary to
enable display of the extended menu.
Enabling display of the extended menu
To enable display of the extended menu, an internal switch
must be set to on, and extended menu display must be
enabled in the maintenance menu. (The internal switch is
set to on when the unit is shipped from the factory. Unless
you have set it to off, there is no need to change the switch
setting.)
Menu items in the 800s, relating to audio control
Settings
Set the audio muting conditions during shuttle playback.
off: Not muted.
on: Muted.
Control non-audio flags in digital audio output.
During playback (except E-E mode), set non-audio flags in digital audio
output to the following states.
on: Set to on (data is non-audio)
auto: Set as follows.
•When data is read from disc and confirmed: Follow the data.
•When data from disc is not confirmed: Maintain current state.
Select the audio signals to assign to SDI and i.LINK(AV/C) audio output
channels.
tr1/2: Tracks 1 and 2 assigned to audio output channels 1 and 2.
tr3/4: Tracks 3 and 4 assigned to audio output channels 1 and 2.
tr5/6: Tracks 5 and 6 assigned to audio output channels 1 and 2.
tr7/8: Tracks 7 and 8 assigned to audio output channels 1 and 2.
tr1/2: Tracks 1 and 2 assigned to audio output channels 3 and 4.
tr3/4: Tracks 3 and 4 assigned to audio output channels 3 and 4.
tr5/6: Tracks 5 and 6 assigned to audio output channels 3 and 4.
tr7/8: Tracks 7 and 8 assigned to audio output channels 3 and 4.
Select the audio mode for S400 (i.LINK) connector (output).
4ch: 12 bit/32 kHz/4ch
2ch: 16 bit/48 kHz/2ch
Menu items in the 900s, relating to digital process
Settings
Select whether or not to add information to the SDI output.
off: Do not add digital audio data channels 5 to 8.
on: Add digital audio data channels 5 to 8.
off: Do not add RP188 time code data.
on: Add RP188 time code data.
75
7-3 Extended Menu