Cuing Up A Frame Including An Essence Mark - Sony PDW-V1 Operation Manual

4-3-2 Cuing Up a Frame Including an
Essence Mark
Proceed as follows.
1
RESET button
AUDIO MONITOR
L
CH-1 CH-2 CH-3 CH-4 CH-5 CH-6
R
ACCESS
SUBCLIP THUMBNAIL MENU SET
NETWORK
LOCAL
REMOTE
CLIP ESSENCE SYSTEM S.SEL
MENU MARK MENU
PREV PLAY NEXT STOP
IN
TOP F REV F FWD END
5 3,5
1
Hold down the SHIFT button, and press the
THUMBNAIL button, turning it on.
The essence mark selection screen appears.
To escape from the essence mark selection screen to
the previous screen
Press the RESET button.
2
Use the arrow buttons to select the desired essence
mark.
You can select essence marks with the following
operations.
Press the PREV or NEXT button: Move to the
previous or next essence mark.
3
Press the SET button.
Thumbnails of the frames including the selected
essence mark appear.
(The example shows the case where SHOT MARK1 is
selected as the essence mark.)
SHUTTLE JOG
CH-7 CH-8
RESET SHIFT
MARK1
OUT
MARK2
2,4 4
This indicates that the
thumbnail images are the
frames including the essence
mark (SHOTMARK1).
Currently selected
SHOTMARK1 frame
Date and time of recording
of the clip containing the
selected frame
4
Use the arrow buttons or jog dial to select the desired
frame.
You can select frames with the following operations.
Press the PREV or NEXT button: Move to the
previous or next frame.
Press the PREV or NEXT button with the SHIFT
button held down: Move to the first or last frame.
Press the F or f button with the SHIFT button held
down: Switch to the previous or next page.
5
Press the SET button to cue up the selected clip.
To start playback from the selected frame, press the
PLAY button.
Sixth frame is selected
from a total of 31
SHOTMARK1 frames
43
4-3 Thumbnail Search