Sony PDW-V1 Operation Manual page 74

Item number Item name
In 525(u)-line 12 ... 19
mode
20
In 525(J)-line 12 ... 20
mode
21
In 625-line 9 ... 22
mode
23
705 EDGE SUBCARRIER REDUCER
MODE
707 FORCED VERTICAL
INTERPOLATION OFF
713 VIDEO SETUP REFERENCE
OUTPUT LEVEL
715 VIDEO GAIN CONTROL
716 CHROMA GAIN CONTROL
717 CHROMA PHASE CONTROL
718 SETUP LEVEL (525(U)/525(J)-line
modes)/BLACK LEVEL (625-line
mode)
74
7-3 Extended Menu
Menu items in the 700s, relating to video control
Settings
LINE 12 ... LINE 19 Specify blanking for lines 12 to 19.
blnk: Carry out blanking.
thru: Switch off blanking.
LINE 20 Specify blanking for line 20.
blnk: Carry out blanking.
half: Carry out half-blanking.
thru: Switch off blanking.
LINE 12 ... LINE 20 Specify blanking for lines 12 to 20.
blnk: Carry out blanking.
thru: Switch off blanking.
LINE 21 Specify blanking for line 21.
blnk: Carry out blanking.
half: Carry out half-blanking.
thru: Switch off blanking.
LINE 9, 322 ... LINE Specify blanking for lines 9, 322 to 22, 335.
22, 335 blnk: Carry out blanking.
thru: Switch off blanking.
LINE 23 Specify blanking for line 23.
half: Carry out half-blanking.
thru: Switch off blanking.
Select whether to enable the edge subcarrier reducer (ESR).
on: Enable.
off: Do not enable.
When playing back a composite signal, set this to "on."
The "Y-add" function is normally switched on automatically during jog or
variable speed playback. This item selects whether or not to force the "Y-
add" function off.
auto: Automatically switch the "Y-add" function on.
off: Force the "Y-add" function off.
The "Y-add" function is a circuit operation to interpolate the video signal
vertically during jog or variable speed playback for the purpose of reducing
the vertical movement of the playback picture.
Select whether to add the setup (7.5%) to the output analog video signals
(when 525(U) or 525(J)-line mode is selected).
0.0%: Do not add.
7.5%: Add.
The default settings for each line mode are as follows:
525(U)-line mode: 7.5%
525(J)-line mode: 0.0%
Adjust the video output level.
–512 to 0 to 511
Adjust the chroma output level.
–512 to 0 to 511
Adjust the chroma phase.
–128 to 0 to 127
Adjust the setup level (black level).
–512 to 0 to 511